Volume 5, Issue 2, June 2015

Second regular issue in 2015

SEM images of samples with CNT’s in central part in copper and aluminium.

Microstructure and microhardness of metal matrix composites with carbon nanotubes produced by severe plastic deformation

R.K. Khisamov, K.S. Nazarov, S.N. Sergeev, R.R. Kabirov, R.R. Mulyukov, A.A. Nazarov

PDF editorial's selection Article

Year: 2015

Volume: 5 Issue: 2

Pages: 119-123

Journal section: Structure design and analysis

Effect of boron addition on recrystallization behavior of commercially pure titanium subjected to hot compression

R.A. Gaisin, V. Imayev, R. Imayev, E. Gaisina

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 124-128

Journal section: Structure design and analysis

High strain rate superplasticity of an 1570C aluminum alloy with bimodal structure obtained by equal-channel angular pressing and rolling

E. Avtokratova, O. Mukhametdinova, O. Sitdikov, M. Markushev

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 129-132

Journal section: Mechanical and physical properties of materials

The effect of modification of nickel interlayer surface on the uniformity of deformation at pressure welding of titanium alloy and stainless steel

R. Khazgaliev, M. Imayev, R. Mulyukov, F. Safin

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 133-137

Journal section: Theory and computer simulations in materials science and condensed matter physics

Mechanical properties of magnesium alloys prepared according to the technology include rapid crystallization and subsequent compaction

L.L. Rokhlin, T.V. Dobatkina, I.G. Korolkova, E.A. Lukyanova

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 138-141

Journal section: Mechanical and physical properties of materials

The solid-phase joints of high-temperature nickel alloy with ultrafine-grained structure for disks and Ni3Al based single-crystal blade alloy

A.A. Drozdov, V.A. Valitov, K.B. Povarova, O.A. Bazyleva, E.V. Galieva, S.V. Ovsepyan

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 142-146

Journal section: Materials processing and applications

Wear of tin babbit with different structure

A.K. Valeeva, I.S. Valeev, R.F. Fazlyakhmetov, A.I. Pshenichnyuk

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 147-151

Journal section: Mechanical and physical properties of materials

Ultrafine grained structure formation in nickel-based superalloy EP741NP during hot deformation in the (γ+γ')-phase field

A. Ganeev, V. Valitov

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 152-155

Journal section: Structure design and analysis

CONTRIBUTION OF NANOSIZED STRUCTURAL AND PHASE ELEMENTS FORMED AT DIFFERENT STAGES OF PREPARATION AND TREATMENT INTO THE HIGH-TEMPERATURE STRENGTH CHARACTERISTICS OF POWDER STRUCTURAL ALLOYS OF THE NIAL-Y2O3 SYSTEM

A. Drozdov, K. Povarova, O. Skachkov, A. Morozov, V. Valitov

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 156-160

Journal section: Structure design and analysis

Investigation of the structure and mechanical properties of the bonding of the hard magnetic alloy 25H15K with low carbon steel processed by pressure welding

A.F. Aletdinov, G.F. Korznikova, A.V. Korneva, R.M. Galeyev, A.V. Korznikov

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 161-164

Journal section: Mechanical and physical properties of materials

Evolution of crystallographic texture in titanium VT6 alloy subjected to plane cross rolling

V.D. Sitdikov, I.V. Alexandrov, V.N. Danilenko, V.A. Popov, R.M. Galeev

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 165-169

Journal section: Mechanical and physical properties of materials

The effect of warm deformation by abc-pressing method on mechanical properties of titanium nickelide

A.I. Lotkov, V.N. Grishkov, A.A. Baturin, E.F. Dudarev, D. .Y. Zhapova, V.N. Timkin

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 170-174

Journal section: Mechanical and physical properties of materials

Mathematical modeling of the manufacturing process of axisymmetric aircraft parts by the local deformation method

R.U. Sukhorukov, A.A. Sidorov, A.R. Ibragimov, F.Z. Utyashev

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 175-178

Journal section: Materials processing and applications

The paper reports results of investigation that has been carried out on the morphology, particle size, phase composition and the structure of particles deposited from the low-temperature plasma arc discharge on the walls of the vacuum chamber during the spray of a titanium cathode.

Features of the structure, deposition from arc discharge plasma

N.A. Smolanov, V.A. Neverov

PDF editorial's selection Article

Year: 2015

Volume: 5 Issue: 2

Pages: 179-184

Journal section: Structure design and analysis

Low temperature superplasticity and production of hollow structures out of VT6 titanium alloy

R.Y. Lutfullin, A.A. Kruglov, M.K. Mukhametrakhimov, O.A. Rudenko

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 185-188

Journal section: Materials processing and applications

EFFECT OF WORK HARDENING AND NANOSTRUCTURING UPON SHORT-TERM MECHANICAL ACTIVATION OF RU-AL AND NI-AL POWDER MIXTURES ON THE STRUCTURE OF COMPACT SINTERED SAMPLES

A. Morozov, A. Drozdov, K. Povarova, E. Galieva

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 189-193

Journal section: Structure design and analysis

Solid-phase weldability of sheets titanium alloy VT6 at low temperature

M.H. Mukhametrakhimov

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 194-197

Journal section: Mechanical and physical properties of materials

DEVELOPMENT AN EFFECTIVE ISOTHERMAL DEFORMATION FOR CHROME STEEL 11KH11N2V2МF-SH

M.I. Nagimov, S.K. Mukhtarov, F.Z. Utyashev, R.Y. Sukhorukov

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 198-201

Journal section: Mechanical and physical properties of materials

Structure and properties of aluminum alloy system Al-Mg-Si after processing by the method of Multi-ECAP-Conform

E.I. Fakhretdinova, E.V. Bobruk, G.Yu. Sagitova, G.I. Raab

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 202-206

Journal section: Mechanical and physical properties of materials

COMPARISON OF THE SIMULATION RESULTS FOR SUPERPLASTIC FORMING OF TWO TYPES OF MULTILAYER HOLLOW STRUCTURES

A. Safiullin, A. Akhunova, S. Dmitriev, R. Safiullin

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 207-210

Journal section: Theory and computer simulations in materials science and condensed matter physics

Creating high surface in the metal mesh carrier

N.N. Gryzunova, A.A. Vikarchuk, M.R. Shafeev

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 211-214

Journal section: Structure design and analysis

Scientific bases of formation technology and processing of nanostructured metals and alloys

F.Z. Utyashev, Sh.Kh. Mukhtarov, R.Yu. Sukhorukov

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 215-219

Journal section: Materials processing and applications

BEHAVIOUR OF SILICON PARTICLES IN AK21 ALUMINUM ALLOY (IN RUSSIA) AT SEVERE PLASTIC DEFORMATION AND ANNEALING

G.R. Khalikova, K.S. Shvets, V.G. Trifonov

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 220-224

Journal section: Structure design and analysis

About self-organizing pores in polymeric films with titanium dioxide and microadding of boehmite

N.M. Antonova

PDF Article

Year: 2015

Volume: 5 Issue: 2

Pages: 225-229

Journal section: Experimental methods in materials research

Volume 5, Issue 2, June 2015

Microstructure and microhardness of metal matrix composites with carbon nanotubes produced by severe plastic deformation

Effect of boron addition on recrystallization behavior of commercially pure titanium subjected to hot compression

High strain rate superplasticity of an 1570C aluminum alloy with bimodal structure obtained by equal-channel angular pressing and rolling

The effect of modification of nickel interlayer surface on the uniformity of deformation at pressure welding of titanium alloy and stainless steel

Mechanical properties of magnesium alloys prepared according to the technology include rapid crystallization and subsequent compaction

The solid-phase joints of high-temperature nickel alloy with ultrafine-grained structure for disks and Ni3Al based single-crystal blade alloy

Wear of tin babbit with different structure

Ultrafine grained structure formation in nickel-based superalloy EP741NP during hot deformation in the (γ+γ')-phase field

CONTRIBUTION OF NANOSIZED STRUCTURAL AND PHASE ELEMENTS FORMED AT DIFFERENT STAGES OF PREPARATION AND TREATMENT INTO THE HIGH-TEMPERATURE STRENGTH CHARACTERISTICS OF POWDER STRUCTURAL ALLOYS OF THE NIAL-Y2O3 SYSTEM

Investigation of the structure and mechanical properties of the bonding of the hard magnetic alloy 25H15K with low carbon steel processed by pressure welding

Evolution of crystallographic texture in titanium VT6 alloy subjected to plane cross rolling

The effect of warm deformation by abc-pressing method on mechanical properties of titanium nickelide

Mathematical modeling of the manufacturing process of axisymmetric aircraft parts by the local deformation method

Features of the structure, deposition from arc discharge plasma

Low temperature superplasticity and production of hollow structures out of VT6 titanium alloy

EFFECT OF WORK HARDENING AND NANOSTRUCTURING UPON SHORT-TERM MECHANICAL ACTIVATION OF RU-AL AND NI-AL POWDER MIXTURES ON THE STRUCTURE OF COMPACT SINTERED SAMPLES

Solid-phase weldability of sheets titanium alloy VT6 at low temperature

DEVELOPMENT AN EFFECTIVE ISOTHERMAL DEFORMATION FOR CHROME STEEL 11KH11N2V2МF-SH

Structure and properties of aluminum alloy system Al-Mg-Si after processing by the method of Multi-ECAP-Conform

COMPARISON OF THE SIMULATION RESULTS FOR SUPERPLASTIC FORMING OF TWO TYPES OF MULTILAYER HOLLOW STRUCTURES

Creating high surface in the metal mesh carrier

Scientific bases of formation technology and processing of nanostructured metals and alloys

BEHAVIOUR OF SILICON PARTICLES IN AK21 ALUMINUM ALLOY (IN RUSSIA) AT SEVERE PLASTIC DEFORMATION AND ANNEALING

About self-organizing pores in polymeric films with titanium dioxide and microadding of boehmite

General information

Information for readers

Information for authors

Information for reviewers