Wear of tin babbit with different structure

A.K. Valeeva, I.S. Valeev, R.F. Fazlyakhmetov, A.I. Pshenichnyuk show affiliations and emails
Accepted: 13 October 2014
This paper is written in Russian
Citation: A.K. Valeeva, I.S. Valeev, R.F. Fazlyakhmetov, A.I. Pshenichnyuk. Wear of tin babbit with different structure. Lett. Mater., 2015, 5(2) 147-151
BibTex   https://doi.org/10.22226/2410-3535-2015-2-147-151

Abstract

Wear of tin babbitt prepared by casting and liquid stamping was investigated. It has been shown that the liquid stamping leads to a structure with uniformly distributed fine particles of intermetallic phase. This structure characterized by the absence of running-up step and low mass loss as well as at single and at a double load too.

References

1. I. G. Goryacheva. Mechanics of Friction Interaction. M. Nauka. (2001) 478p. (in Russian) [И. Г. Горячева. Механикафрикционноговзаимодействия. М. Наука (2001) 478 с.].
2. I. M. Lyubarskii, I. S. Palatnik. Metallophysics of Friction. M. Metallurgy. (1976) 176 p. (in Russian) [И. М. Любарский, И. С. Палатник. Металлофизикатрения. М. Металлургия (1976) 176 c.].
3. L. G. Korshunov, N. I. Noskova, A. V. Korznikov, N. L. Chernenko, N. F. Vil'Danova. The Physics of Metals and Metallography. 108 (5), 519-526 (2009).
4. A. D. Kuritsyna. Wear and Friction in Machines. M. Academy of Sciences USSR. (1962) 496 p. (in Russian) [А. Д. Курицына. Трениеиизносвмашинах. М. АкадемиянаукСССР (1962) 496 c.].
5. F. A. Sadykov, N. P. Barykin, I. Sh. Valeev, V. N. Danilenko. Journal of Materials Engineering and Performance. 12 (1), 29-36 (2003).
6. F. A. Sadykov, N. P. Barykin, I. Sh. Valeev. Strength of Materials. 34 (2), 196-199 (2002).
7. N. P. Barykin, R. F. Fazlyakhmetov, A. Kh. Valeeva. Metal Science and Heat Treatment. 48 (1-2), 88-91 (2006).
8. I. V. Kragelskyi. Friction and Wear. M. Mashinostroyenie. (1968). 480 p. (in Russian) [И. В. Крагельский. Трение и износ. М. Машиностроение (1968) 480 c.].