Impact fracture characteristics of multilayer laminate based on near-alpha titanium alloy

Accepted  01 December 2022
Citation: A.A. Sarkeeva. Impact fracture characteristics of multilayer laminate based on near-alpha titanium alloy. Lett. Mater., 2022, 12(4s) 499-503
BibTex   https://doi.org/10.22226/2410-3535-2022-4-499-503

Abstract

Schematic illustration of impact specimen cutting from multilayer laminate in the crack divider orientationTitanium near-alpha alloy Ti-6Аl-2Zr-1.2Мо-1.3V was used to manufacture a multilayer laminate by diffusion bonding. The laminate consisted of thirteen sheets stacked relative to each other in a way that they all had common rolling direction. The influence of cutting orientation of specimens on the mechanical behavior under impact loading of the laminate was determined. The results of quantitative assessment of the impact fracture characteristics for the studied specimens was analyzed. The transverse specimens had a higher impact strength value in comparison to the longitudinal specimens. The results of fractographic studies showed the presence of minor delaminations on the surfaces of fractured specimens.

References (27)

1. V. N. Moiseyev. Titanium Alloys. Russian Aircraft and Aerospace Applications. 1st Edition. Florida, CRC Press (2005) 216 p. Crossref
2. Titanium and Titanium Alloys: Fundamentals and Applications. 1rd edn (ed. by C. Leyens, M. Peters). Weinheim, Wiley-VCH (2003) 523 p. Crossref
3. J. C. Williams, R. R. Boyer. Metals. 10 (6), 705 (2020). Crossref
4. A. I. Horev. Aviaczionny`e materialy` i tekhnologii. 1, 204 (2007). (in Russian) [А. И. Хорев. Авиационные материалы и технологии. 1, 23 (2007).].
5. A. A. Kruglov, R. Ya. Lutfullin, M. Kh. Mukhametrakhimov, О. А. Rudenko, A. A. Sarkeeva, R. V. Safiullin. Lett. Mater. 11 (4), 457 (2021). (in Russian) [А. А. Круглов, Р. Я. Лутфуллин, М. Х. Мухаметрахимов, О. А. Руденко, А. А. Саркеева, Р. В. Сафиуллин. Письма о материалах. 11 (4), 457 (2021).]. Crossref
6. X. Li, Q. Zhu, S. Liu, F. Li, F. Chen, H. Wang, H. Chang. Journal of Materials Research and Technology. 18, 1704 (2022). Crossref
7. A. I. Plokhikh, S. V. Putirskiy, T. Wang. Journal of Physics: Conference Series. 1990 (1), 012005 (2021). Crossref
8. A. A. Sarkeeva, A. A. Kruglov, R. Ya. Lutfullin. IOP Conference Series: Materials Science and Engineering, 1008 (1), 012071 (2020). Crossref
9. R. W. Hertzberg, R. P. Vinci, J. L. Hertzberg. Deformation and Fracture Mechanics of Engineering Materials. 4th edn. Inc, John Wiley & Sons (2021).
10. R. P. Weber, K. K. Chawla, J. C. Miguez Suarez. Mater. Sci. Eng. A. 580, 279 (2013). Crossref
11. C. M. Cepeda-Jiménez, J. M. Garcia-Infanta, M. Rozuelo et al. Scr. Mater. 61 (4), 407 (2009). Crossref
12. W. Sun, F. You, F. Kong, X. Wang, Y. Chen. Journal of Alloys and Compounds. 820, 153088 (2020). Crossref
13. D. R. Lesuer, C. K. Syn, O. D. Sherby, et al. International Materials Reviews. 41 (5), 169 (1996). Crossref
14. S. V. Kuteneva, S. V. Gladkovsky, D. I. Vichuzhanin, P. V. Kosmachev, P. D. Nedzvetsky. Lett. Mater. 12 (3), 225 (2022). Crossref
15. A. A. Sarkeeva. Letters on Materials. 11 (4s), 571 (2021). Crossref
16. N. F. Kazakov. Diffusion bonding of materials. Oxford, Pergamon (2015) 304 p.
17. H. S. Lee. In: Welding and Joining of Aerospace Materials. Woodhead Publishing (2012) pp. 320 - 344. Crossref
18. T. Gietzelt, V. Toth, A. Huell. Chapter 9. Diffusion Bonding: Influence of Process Parameters and. Material Microstructure. In: Joining Technologies. 1st edition. Intech (2016) 282 p. Crossref
19. D. V. Dunford, A. Wisbey. Materials Research Society Symposium Proceedings. 314, 39 (1993). Crossref
20. A. K. Akhunova, V. A. Valitov, E. V. Galieva. Lett. Mater. 11 (3), 254 (2021). (in Russian) [А. Х. Ахунова, В. А. Валитов, Э. В. Галиева. Письма о материалах. 11 (3), 254 (2021).]. Crossref
21. R. Ya. Lutfullin, O. A. Kaibyshev, R. V. Safiullin et al. Acta Metall Sin. 13, 561 (2000).
22. A. A. Sarkeeva, A. A. Kruglov, R. Ya. Lutfullin et al. Composites Part B. 187, 107838 (2020). Crossref
23. A. A. Sarkeeva. Letters on Materials. 10 (3), 345 (2020). (in Russian) [А. А. Саркеева. Письма о материалах. 10 (3), 345 (2020).]. Crossref
24. Russian standart GOST 22848-77.
25. M. Georgiev. Impact Crack-Resisting of Metals. Sofia, Bulvest 2000 (2007) 231 p. (in Bulgarian) [М. Георгиев. Пукнатиноустойчивост на металите при ударно натоварване. София, БУЛВЕСТ 2000 (2007) 231 с.].
26. H. L. Haskel, E. Pauletti, J. P. Martins, A. L. M. Carvaiho. Materials Research. 17 (5), 1238 (2014). Crossref
27. C. M. Cepeda-Jiménez, A. Orozco-Caballero, A. A. Sarkeeva, et al. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Sciencethis link is disabled. 44 (10), 4743 (2013). Crossref

Similar papers

Funding

1. IMSP RAS State assignment - No. АААА-А17-117041310221-5