Mechanical properties of Al-Nb in situ metal-matrix composites fabricated by constrained high pressure torsion at 10 GPa and subsequent annealing

Mechanical alloying of dissimilar metals by means of severe plastic deformation techniques is known to be a perspective method of obtaining in situ metal matrix composites with advanced properties. Recent investigations found out that besides severe mixing of elements, intensive formation of non-equilibrium intermetallic phases takes place. Presence of intermetallic particles in the composite affects both its physical and mechanical properties. In this work we have realized the fabrication of Al-Nb composites in one step by means of high-pressure torsion technique. A non-trivial phenomenon of growth of tensile strength with increasing number of revolutions during HPT was revealed. It was explained by more homogeneous mixing of components and precipitation of intermetallic phase in the vicinity of Al-Nb interphases. The microstructural observations and X-ray diffraction analysis allowed to reveal Al3Nb intermetallic phase in the as deformed composites, while the equilibrium temperature of formation of this phase is above 600°C. Varying the number of revolutions and post deformation annealing allows obtaining composites with different fractions of intermetallic particles. This approach can be considered as a way for the development of composites with a tailorable complex of physical and mechanical properties.

Al based layered in situ metal-matrix composites fabricated by constrained high pressure torsion

Г.Ф. Корзникова, Е.А. Корзникова, Г.Р. Халикова, К.С. Назаров, Р.Х. Хисамов, С.Н. Сергеев, Р.У. Шаяхметов, Р.Р. Мулюков

Developing magnesium-based composites through high-pressure torsion

M.M. Castro, P.R. Pereira, R.B. Figueiredo, T.G. Langdon

Effect of HPT straining and further natural aging on the structure and hardness of aluminum alloy 1965 with nanosized TM aluminides

M.V. Markushev, E.V. Avtokratova, S.V. Krymskiy, V.V. Tereshkin, O.S. Sitdikov

Метод оценки проскальзывания на различных стадиях интенсивной пластической деформации кручением и его применение на примере низкоуглеродистой стали Fe-0.1%C

Д.В. Гундеров , Р.Н. Асфандияров , Г.И. Рааб , А.А. Чуракова , В.В. Астанин

Antibacterial nanospike surface obtained by high-fluence Ar+ bombardment of nanostructured titanium

R.R. Mulyukov, R.K. Khisamov, A.M. Borisov, A.K. Baimiev, M.A. Ovchinnikov, R.R. Timiryaev, A.A. Vladimirova

Effect of high-pressure torsion on mechanical properties and in vitro biocompatibility of pure Zn

N.S. Martynenko, N.Y. Anisimova, N.Y. Tabachkova, V.N. Serebryany, O.V. Rybalchenko, A.V. Sannikov, D.R. Temralieva, E.A. Lukyanova, E.A. Kornjushenkov, M.V. Kiselevskiy, S.V. Dobatkin

Degradation of the layered structure of a Cu / Ta composite during high-pressure torsion

A.M. Patselov, M.S. Pushkin, A.V. Inozemtsev, A.V. Plotnikov, T.P. Tolmachev, V.P. Pilyugin

Annealing-induced recrystallization of iron after high pressure torsion at 80 K

K.E. Shugaev, M.V. Degtyarev, L.M. Voronova, T.I. Chashchukhina, T.M. Gapontseva

О роли параметров технологического процесса в реакции алюминотермического синтеза in situ композитов Al -TiB2: микроструктура и механические свойства

S. Madhavan, S. Balasivanandha Prabu, K.A. Padmanabhan

1. Institute for Metals Superplasticity Problems, Russian Academy of Sciences - state assignment
2. Russian Science Foundation - Grant No. 18-12-00440-П
3. Center for Shared Access “Structural and Physicomechanical Investigations of Materials” at the IMSPRAS -
4. Ministry of Education and Science of Russia for the Federal State Budgetary Educational Institution of Higher Education "USATU" - No. 075-03-2021-014/4