An Experimental and Theoretical Analysis of Geometric Features of Equal Channel Plastic Flow During Angular Extrusion of Materials via Route C

A.V. Perig, S.I. Bondarenko, E.A. Bondarenko show affiliations and emails
Received 05 July 2012; Accepted 13 July 2012;
This paper is written in Russian
Citation: A.V. Perig , S.I. Bondarenko, E.A. Bondarenko. An Experimental and Theoretical Analysis of Geometric Features of Equal Channel Plastic Flow During Angular Extrusion of Materials via Route C. Lett. Mater., 2012, 2(2) 103-106
BibTex   https://doi.org/10.22226/2410-3535-2012-2-103-106

Abstract

The geometric features of multipass deformation during an Equal Channel Angular Extrusion of lead workpiece models via route C have been analyzed by the application of initial square separation gridlines to the smooth surface of one semicylinder, which forms the initial cylindrical composite workpiece.

References (23)

1. M.V. Markushev. Letters on Materials 1, 36 (2011), (inRussian).
2. R.V. Safiullin. Letters on Materials 2, 32; 36 (2012), (inRussian).
3. A.V. Altukhov, A.F. Tarasov, A.V. Perig. Letters onMaterials 2, 54 (2012), (in Russian).
4. E.G. Astafurova, G.G. Zakharova, E.V. Naydenkin, G.I.Raab, P.D. Оdessky, S.V. Dobatkin. Letters on Materials 1, 198 (2011) (in Russian).
5. A.V. Perig, N.N. Golodenko, I.G. Zhbankov, I.I. Boiko, A.A. Sitnik. Letters on Materials 1, 217 (2011), (inRussian).
6. M.I. Nagimov, A.A. Nazarov, O. Saray, G. Purcek, O.R.Valiakhmetov, I.M. Safarov, R.R. Mulyukov. Letters onMaterials 1, 151 (2011), (in Russian).
7. E.V. Avtokratova, R.R. Ilyasov, I.Sh. Valeev, O.Sh. Sitdikov, M.V. Markushev. Letters on Materials 1, 194 (2011), (inRussian).
8. Ye.Ye. Deryugin. Letters on Materials 1, 231 (2011), (inRussian).
9. E.A. Korznikova. Letters on Materials 1, 208 (2011), (inRussian).
10. G.F. Korznikova, E.A. Korznikova. Letters on Materials 2, 25 (2012), (in Russian).
11. A.N. Chuvyrov, A.R. Khamidullin. Letters on Materials 2, 29 (2012), (in Russian).
12. M.V. Karavaeva, S.K. Kiseleva, V.M. Bychkov, A.Yu.Medvedev, A.V. Supov, F.F. Musin, I.V. Alexandrov, V.V.Latysh. Letters on Materials 2, 40 (2012), (in Russian).
13. A.V. Perig, A.M. Laptev, A.V. Tyshkevich, E.A.Bondarenko, S.V. Podlesny. Forging and StampingProduction. Materials Working by Pressure 2, 14 (2010)(in Russian).
14. A.V. Perig, A.M. Laptev, N.N. Golodenko, Yu.A. Erfort, E.A. Bondarenko. Mater. Sci. Eng. A527, 3769 (2010).
15. A.V. Perig, A.V. Tyshkevich. Forging and StampingProduction. Materials Working by Pressure 2, 41 (2012)(in Russian).
16. A.V. Perig, I.I. Boyko, A.A. Sitnik, I.A. Matveyev, S.V.Podlesny, S.I. Bondarenko. Forging and StampingProduction. Materials Working by Pressure 5, 23 (2012), (in Russian).
17. A.V. Perig, A.M. Laptev, A.V. Tyshkevich, E.A.Bondarenko. Proceedings of the Third InternationalConference «Deformation & Fracture of Materials andNanomaterials» (DFMN-2009). Moscow, IMMS RAS(2009) p. 216, (in Russian).
18. A.V. Perig, A.V. Tyshkevich, E.A. Bondarenko, S.I.Bondarenko, D.R. Arakelov. Proceedings of the FourthInternational Conference «Deformation & Fracture ofMaterials and Nanomaterials» (DFMN-2011). Moscow, IMMS RAS (2011) p. 199, (in Russian).
19. S.I. Bondarenko, A.V. Perig, E.A. Bondarenko. Abstractsof All-Russia Youth Conference with the elements of thescientific school «Functional nanomaterials and highpuritysubstances». Moscow, IMMS RAS (2012), p. 90, (in Russian).
20. A.V. Perig, E.A. Bondarenko, S.I. Bondarenko.Book of articles of the scientific conference withinternational participation «Geometry of manifoldsand its applications». Ulan-Ude, Buryat State UniversityPublishing Department (2012), p. 57, (in Russian).
21. I.P. Renne. Manuf. Eng. 1 (1967), (in Russian).
22. C. Truesdell, W. Noll. The Non-Linear Field Theories ofMechanics. New York, Springer-Verlag (2004) 636 p.
23. A. Bertram. Elasticity and Plasticity of LargeDeformations. An Introduction. Springer-Verlag (2008)340 p.

Cited by (1)

1.
Alexander V. Perig, Nikolai N. Golodenko. Advances in Materials and Processing Technologies. 5(4), 617 (2019). Crossref

Similar papers