On some mechanisms of limit friction with fracture

R.V. Goldstein, N.M. Osipenko show affiliations and emails
Received 19 April 2012; Accepted 19 April 2012;
This paper is written in Russian
Citation: R.V. Goldstein, N.M. Osipenko. On some mechanisms of limit friction with fracture. Lett. Mater., 2012, 2(3) 121-125
BibTex   https://doi.org/10.22226/2410-3535-2012-3-121-125

Abstract

A model of the process leading to formation of the third body elements at fracture of material in a dry friction contact zone was suggested. A variant of a plane element of the third body evolution was analyzed for the regime of an intensive shear action on its contact surfaces. A separated fragment can form an rolling element or remain to be a plane slipping element in dependence on a relation between normal pressure forces and shear forces in the contact zone. A criterion for twisting a plane element into a rolling element was obtained (within the framework of the plane elasticity)

References (10)

1. E.A. Marchenko. About the Nature of Metal SurfaceFracturein Friction. Moscow: Nauka. (1979) 120 p. (in Russian)[Е.А. Марченко. О природе разрушения поверхностиметаллов при трении. М.: Наука. (1979) 120 с].
2. V.I. Vladimirov. Electronic J.: Friction, Wear, Lubrication, 10(2), 7 (2008) [В.И. Владимиров. Электронный жур-нал: Трение, износ, смазка. 10(2), 7 (2008)].
3. N.M. Alekseev, R.I. Bogdanov, N.A. Bushe et al. Frictionand Wear. 6, 965 (1988) [Н.М. Алексеев, Р.И. Богданов, Н.А. Буше и др. Трение и износ. 6, 965 (1988)].
4. N. M. Alekseev. Friction and Wear. 2, 197 (1989) [Н.М.Алексеев. Трение и износ. 2, 197 (1989)].
5. N.M. Alekseev, R.V. Goldstein, N.M. Osipenko. Mechanicsof Solids. 5, 134 (1992) [Н.М. Алексеев, Р.В. Гольдштейн, Н.М. Осипенко. Известия АН СССР МТТ. 5, 134 (1992)].
6. G.I. Barenblatt. Appl. Mech. Techn. Phys. 4, 3 (1961) [Г.И.Баренблатт. ПМТФ. 4, 3 (1961)].
7. K. Hellan. Introduction to Fracture Mechanics. McGray-Hill Book Company (1984) 364 p.
8. R.V. Goldstein, V.M. Vainshelbaum. Material scale lengthas a measure of fracture toughness in fracture mechanicsof plastic materials. Int. J. Fracture. 14(2), 185 (1978).
9. I.V. Kragel’ski, M.N. Dobychin, V.S. Kombalov. Foundationsof Calculations of Friction and Wear. Moscow:Mashinostroenie (1977) 256 p. [И.В. Крагельский, М.Н.Добычин, В.С. Комбалов. Основы расчетов на трениеи износ. М.: Машиностроение (1977) 576 с].
10. V.I. Feodos’ev. Selected Problems and Questions onStrength of Materials. Moscow: Nauka (1973) 400 p.[В.И. Феодосьев. Избранные задачи и вопросы по со-противлению материалов. М: Наука (1973) 400 с].

Cited by (1)

1.
J. Horng, Nikolay M. Osipenko, Fedor I. Stepanov, Elena V. Torskaya. Materials. 14(19), 5689 (2021). Crossref

Similar papers