THE PRINCIPLES OF PRODUCING AN ULTRAFINE-GRAINED STRUCTURE IN LARGE-SECTION BILLETS

R.M. Imayev; A.A. Nazarov; R.R. Mulyukov; G.F. Khasanova

doi:10.22226/2410-3535-2014-4-295-301

THE PRINCIPLES OF PRODUCING AN ULTRAFINE-GRAINED STRUCTURE IN LARGE-SECTION BILLETS

R.M. Imayev, A.A. Nazarov, R.R. Mulyukov, G.F. Khasanova show affiliations and emails

Received 12 January 2015; Accepted 21 January 2015

Citation: R.M. Imayev, A.A. Nazarov, R.R. Mulyukov, G.F. Khasanova. THE PRINCIPLES OF PRODUCING AN ULTRAFINE-GRAINED STRUCTURE IN LARGE-SECTION BILLETS. Lett. Mater., 2014, 4(4) 295-301

BibTex https://doi.org/10.22226/2410-3535-2014-4-295-301

@article{Imayev2014,
author="R.M. Imayev and A.A. Nazarov and R.R. Mulyukov and G.F. Khasanova",
title="THE PRINCIPLES OF PRODUCING AN ULTRAFINE-GRAINED STRUCTURE IN LARGE-SECTION BILLETS",
publisher="Letters on Materials",
year="2014",
journal="Letters on Materials",
volume="4",
number="4",
pages="295-301",
url="https://lettersonmaterials.com/en/Readers/Article.aspx?aid=725",
doi="10.22226/2410-3535-2014-4-295-301"}

Abstract

Summarizing the results of the investigations performed at IMSP RAS, the principles of producing a uniform ultrafine-grained structure in large-section billets, based on the technique of multiple isothermal forging, have been formulated. These principles imply a uniform introduction of plastic strain energy into large-section billets, minimization of contact friction between the die-set and the billets, and deformation processing in the temperature and strain-rate conditions that are most favourable for development of dynamic recrystallization.

References (29)

1. N.A. Smirnova, V.I. Levit, V.P. Pilyugin, R.I. Kurnetsov, L.S. Davydova, R.A. Sazonova. Fiz.Met. Metalloved. 61, 1170(1986). (in Russian).

2. N.A. Smirnova, V.I. Levit, V.P. Pilyugin, R.I. Kurnetsov, M.V. Degtyaryov. Fiz.Met. Metalloved. 62, 566 (1986). (inRussian).

3. N.A. Akhmadeev, R.Z. Valiev, V.I. Kopylov, R.R. Mulyukov.Metally. 5, 96 (1992). (in Russian).

4. R.Z. Valiev, I.V. Alexandrov. Bulk Nanostructured MetallicMaterials. М., Academkniga. (2007) 398 p. (in Russian).

5. R.Z. Valiev, A.P. Zhilyaev, T.G. Langdon. Bulk NanostructuredMaterials.TMS Wiley. (2014) 440 p.

6. S.V. Dobatkin, G.A. Salishchev, А.А. Kuznetsov, A.V. Reshetov, A.S. Synkov, T.N. Konkova. Fizika i TekhnikaVysokikh Davleniy. 16(4), 23 (2006). (in Russian).

7. A. Gholinia, P.B. Prangnell, M.V. Markushev. Acta Mater. 48, 1115 (2000).

8. R. Imayev, E. Evangelista, O. Tassa, J. Stobrava. Mat.Sci. Eng.20211(2), 128 (1995).

9. V.V. Rybin. Large Plastic Strains and Fracture of Metals. М., Metallurgiya. (1986) 224 p. (in Russian).

10. M.E. Kassner, M.E. McMahon. Met. Trans. 18A(6), 835 (1988).

11. M.E. Kassner. Met. Trans. 20A(5), 1989 (1988).

12. A.N. Belyakov, R.O. Kaibyshev. Fiz.Met. Metalloved. 78(1), 130 (1994). (in Russian).

13. G. Gottstein, L. Chang, H.F. Yung. Mat.Sci. Techn. 7, 152 (1991).

14. N.G. Zaripov, A.R. Vagapov, R.O. Kaibyshev.Fiz.Met. Metalloved. 63, 774 (1987). (in Russian).

15. R.O. Kaibyshev. Proc.Int. Conf. on Recrystallization in Met.Mater. Australia. 2, 855 (1990).

16. R.O. Kaibyshev, O.Sh. Sitdikov. Proceedings of the USSRAcademy of Sciences. 321, 306 (1991). (in Russian).

17. R.O. Kaibyshev. Superplasticity of Commercial Alloys. М., Metallurgiya. (1984) 276 p. (in Russian).

18. R.R. Mulyukov. Rossiiskie Nanotekhnologii. 2(7-8), 38(2007). (in Russian).

19. R.R. Mulyukov, R.M. Imayev, A.A. Nazarov. J. Mater. Sci. 43, 7257 (2008).

20. O.R. Valiakhmetov, R.M. Galeyev, G.A. Salishchev.Fiz.Met. Metalloved. 10, 204 (1990).

21. R.M. Imayev, V.M. Imayev. Scripta Met. 25, 2041 (1991).

22. G.A. Salishchev, O.R. Valiakhmetov, R.M. Galeyev. J. Mater.Sci. 28, 2898 (1993).

23. R.M. Imayev, V.M. Imayev, G.A. Salishchev. J. Mater. Sci. 27, 4465(1992).

24. S.V. Zherebtsov, G.A. Salishchev, R.M. Galeyev, O.R. Valiakhmetov, S.Yu. Mironov, S.L. Semiatin. Scr. Mater.51, 1147 (2004).

25. G.A. Salishchev, O.R. Valiakhmetov, R.M. Galeyev, S.P. Malysheva. Metally. 4, 86 (1996). (in Russian).

26. G.A. Salishchev, M.A. Murzinova, S.V. Zherebtsov, R.M. Galeyev, O.R. Valiakhmetov. TMS 131st AnnualMeeting & Exhibition, International Symposium on UltrafineGrained Materials II. Seattle, Washington, USA, February17-21, 2002. TMS, Warrendale, PA. (2002) 113 p.

27. F.Z. Utyashev, R.O. Kaibyshev., V.A. Valitov. European PatentEP 0.909.339 B1. 2001.

28. R.M. Imayev, G.A. Salishchev, O.N. Senkov, V.M. Imayev, N.K. Gabdullin, M.R. Shagiev, A.V. Kuznetsov, F.H. Froes.Mat.Sci. Eng. 300, 263 (2001).

29. R.M. Imayev, N.K. Gabdullin, G.A. Salishchev, O.N. Senkov, V.M. Imayev, F.H. Froes. Acta Mater. 47, 1809 (1999).

Cited by (7)

A. V. Korznikov, I. M. Safarov, R. M. Galeyev, S. N. Sergeev, A. I. Potekaev. Russ Phys J. 58(7), 898 (2015). Crossref

D. Nugmanov, O. Sitdikov, M. Markushev. MSF. 830-831, 7 (2015). Crossref

A. Zhilyaev, A. Raab, G. Raab, I. Kodirov. Lett. Mater. 9(4s), 571 (2019). Crossref

Sh. Kh. Mukhtarov, V. M. Imayev, A. V. Logunov, Yu. N. Shmotin, A. M. Mikhailov, R. A. Gaisin, R. V. Shakhov, A. A. Ganeev, R. M. Imayev. Materials Science and Technology. 35(13), 1605 (2019). Crossref

V.N. Danilenko, S.N. Sergeev, J.A. Baimova, G.F. Korznikova, K.S. Nazarov, R. Kh. Khisamov, A.M. Glezer, R.R. Mulyukov. Materials Letters. 236, 51 (2019). Crossref

Elvina R. Shayakhmetova, Mariya A. Murzinova, Ayrat A. Nazarov. Metals. 11(11), 1800 (2021). Crossref

E. Naydenkin, I. Ratochka, I. Mishin, O. Lykova, O. Zabudchenko. Lett. Mater. 12(4s), 414 (2022). Crossref

THE PRINCIPLES OF PRODUCING AN ULTRAFINE-GRAINED STRUCTURE IN LARGE-SECTION BILLETS

Abstract

References (29)

Cited by (7)

Similar papers

Structure, Phase Composition and Mechanical Properties of Bioinert Zirconium-Based Alloy after Severe Plastic Deformation

Current achievements on superplasticity and related phenomena at the Institute for Metals Superplasticity Problems

Structure and mechanical properties of aluminum – aluminum nanoparticles composite produced by accumulative roll bonding

General information

Information for readers

Information for authors

Information for reviewers