Structure and mechanical properties of squeeze casting aluminum alloy D16

R.K. Gulnara, G.T. Vadim
Received: 23 September 2011; Revised: 03 October 2011; Accepted: 26 October 2011
This paper is written in Russian
Citation: R.K. Gulnara, G.T. Vadim. Structure and mechanical properties of squeeze casting aluminum alloy D16. Letters on Materials, 2011, 1(3) 138-142
BibTex   DOI: 10.22226/2410-3535-2011-3-138-142

Abstract

Influence of size of the ambient pressure enclosed to melt and die temperature on structural changes and mechanical properties are investigated. It is shown, that depending on modes of squeeze casting in an alloy is formed or the dendrite structure or the mixed structure. The opportunity of increase of a level of strength of an alloy up to the values observable in hot-deformed a condition is shown.

References (10)

1.
G. F. Balandin. Bases of the theory of formation of casting.In 2 parts. II. Formation of a macroscopical structureof casting: tutorial for machine-building institute of highereducation on a speciality «Machines and technologiesof foundry manufacture», Moscow, Mechanical engineering(1979) 335 (in Russian) [Г. Ф. Баландин. Основытеории формирования отливки. В 2 – х частях. Ч. II.Формирование макроскопического строения отлив-ки: учеб. пособие для машиностроительных вузов поспециальности «Машины и технологии литейногопроизводства», М., Машиностроение (1979) 335].
2.
A.M. Skrebzov. Convection and crystallization of metalmelt in ingot and molding, Moscow, Mechanical engineering(1993) 144 (in Russian) [А.М. Скребцов.Конвекция и кристаллизация металлического рас-плава в слитках и отливках, М., Металлургия (1993)144].
3.
M.T. Murray, G.A. Chadwick, M.R. Ghomashchi.Materials Australasia, 20 (June, 1990)
4.
M.R. Ghomashchi. Scandinavian Journal of Metals.22(2), 61 (1993)
5.
G. Durrant, M. Gallerneault, B. Cantor. Materials ScienceForum. 242, 77 (1997)
6.
C.P. Hong, H.F. Shen, S.M. Lee. Metall. Mater. Trans. B31, 297 (2000)
7.
M.C. Flemings. Solidification Processing, McGraw – HillBook. New York, NY. (1974)
8.
M.R. Chomashchi, A. Vikhrov. J. Mater. Process. Technol.101, 1 (2000).
9.
G.A. Chadwick, T.M. Yue. Metals and Materials. 5 (1), 6(1989)
10.
G. Williams. Foundry Trade Journal. 66 (February 2,1984)

Cited by (2)

1.
Волкова Е.Ф., Дуюнова В.А., Капитаненко Д.В., Скугорев А.В., Технология легких сплавов, 37-43 (2015).
2.
Лисицкий И.С., Кузнецов М.С., Зараменских К.С., Голованов В.Ф., Полякова Г.В., Цветные металлы, 67-71 (2012).