Experience in obtaining laminated aluminum composites by asymmetric accumulative roll bonding

Получена 15 сентября 2022; Принята 13 октября 2022;
Эта работа написана на английском языке
Цитирование: O.D. Biryukova, A.M. Pesin, D.O. Pustovoitov. Experience in obtaining laminated aluminum composites by asymmetric accumulative roll bonding. Письма о материалах. 2022. Т.12. №4. С.373-378
BibTex   https://doi.org/10.22226/2410-3535-2022-4-373-378

Аннотация

New rolling mill 400 for asymmetrical rolling in NMSTU, MagnitogorskThe issue of asymmetric processing of long products in the range of speed ratios of work rolls from 2 to 5 has not been widely studied and is of interest from the point of view of increasing both the strength and ductility of metal products. An area of severe plastic deformation was found, showing the relationship between shear strain and shear angle, at which large compressive strains and ultra-high shear strains occur. An analysis was made of the values of equivalent deformations of laminated aluminum composites obtained both after the first and second processing cycles, modeled in the DEFORM and QForm software systems. The paper defines a rational range of the speed ratios of work rolls, which makes it possible to obtain not only the rectilinear movement of the metal at the exit from the deformation zone, but also the maximum elongation, the ratio of tensile strength to the yield strength for laminated aluminum composites. A regularity has been deduced showing that with an increase in the speed ratio of work rolls, the rolling forces decrease, the value of the relative reduction at a constant roll gap increases. At the maximum speed ratio of the rolls (5), melting of the samples occurs.

Ссылки (28)

1. G. T. Sudha, B. Stalin, M. Ravichandran, M. Balasubramanian. Materials Today: Proc. 22, 2582 (2020). Crossref
2. S. Wang, W. Shen, J. Guo, T. Yuan, Y. Qiu, Q. Tao. Aquacultural Eng. 90, 20 (2020). Crossref
3. J. Hu, R. Kulagin, Yu. Ivanisenko, B. Baretzky, H. Zhang. Journ. of Manufact. Proc. 55, 373 (2020). Crossref
4. E. N. Borodin, A. Morozova, V. Bratov, A. Belyakov, A. P. Jivkov. Mater. Characterization. 156, 80 (2019). Crossref
5. Z. Liao, M. Polyakov, O. Gavalda Diaz, D. Axinte, G. Mohanty, X. Maeder, J. Michler, M. Hardy. Acta Materialia. 180, 2 (2019). Crossref
6. T. Mineta, H. Sato. Mat. Sci. and Eng. 735, 418 (2018). Crossref
7. S. Jiang, Z. Mao, Y. Zhang, L. Hu. Proc. Eng. 207, 1493 (2017). Crossref
8. M. Lipińska, P. Bazarnik, M. Lewandowska. Arch. of Civ. and Mech. Eng. 16, 717 (2016). Crossref
9. E. N. Stepanova, G. P. Grabovetskaya, I. P. Mishin. Materials Today: Proc. 2, 365 (2015). Crossref
10. R. Z. Valiev, R. K. Islamgaliev, I. V. Alexandrov. Prog. Mat. Sci. 5, 103 (2000). Crossref
11. H. Yu, A. Kiet Tieu, L. Cheng, X. Liu, A. Godbole, H. Li, C. Kong, Q. Qin. Sci. Rep. 4, 5017 (2014). Crossref
12. M. Yang, D. Yan, F. Yuan, P. Jiang, E. Ma. Proc. Natl. Acad. Sci. 115, 7224 (2018). Crossref
13. M. Reihanian, N. Pardis, E. Bagherpour. JMF, Iranian Jour. of Mat. Form. 5, 1 (2018). Crossref
14. H. Yu, C. Lu, K. Tieu, H. Li. A. Godbole, X. Liu, C. Kong. Philosoph. mag. 99, 2265 (2019). Crossref
15. E. Bagherpour, N. Pardis, M. Reihanian, R. Ebrahimi. The Int. Journ. of Adv. Manufact. Techn. 100, 1647 (2019). Crossref
16. D. O. Pustovoytov, A. M. Pesin, A. A. Perehogih, M. K. Sverdlik. Vestnik of NMSTU. 1 (41), 65 (2013). (in Russian) [Д. О. Пустовойтов, А. М. Песин, А. А. Перехожих, М. К. Свердлик. Вестник МГТУ им. Г. И. Носова. 1 (41), 65 (2013).].
17. B. Beausir, J. Scharnweber, J. Jaschinski, H.G. Brokmeier, C.-G. Oertel, Werner Skrotzki. Mat. Sci. and Eng. 527(13), 3271 (2010). Crossref
18. N. Kamikawa, T. Sakai, N. Tsuji. Acta Mater. 55, 5873 (2007). Crossref
19. Y. S. Sato, Y. Kurihara, S. H. C. Park, H. Kokawa, N. Tsuji. Scripta Materialia. 50, 57 (2004). Crossref
20. X. Liu, L. Zhuang, Y. Zhao. Mat. (Basel). 13, 5171 (2020). Crossref
21. Y. S. Kim. Transactions of Mat. Proc. 14, 71 (2005). Crossref
22. A. I. Z. Farahat. World of Met. 68, 1 (2015).
23. J. Bogucka. Archives of Met. and Mat. 59, 127 (2014). Crossref
24. D. O. Pustovoytov, A. M. Pesin, N. M. Lokotunina, A. E. Kozhemiakina. Metal. 1, 265 (2019). Crossref
25. A. Pesin, D. Pustovoitov, O. Biryukova, N. Ilyina. Proc. Manufact. 50, 579 (2020). Crossref
26. A. Pesin, D. Pustovoitov, O. Biryukova, A. Kozhemiakina, K. Pivovarova. Metal. 1, 444 (2021). Crossref
27. O. Biryukova, A. Pesin, D. Pustovoitov, A. Kozhemiakina, L. Nosov. Metal. 1, 496 (2021). Crossref
28. A. M. Pesin, D. O. Pustovoitov, O. D. Biryukova. IOP Conf. Ser.: Mater. Sci. Eng. 447, 012045 (2018). Crossref

Другие статьи на эту тему

Финансирование на английском языке

1. Российский научный фонд - grant of the Russian Science Foundation (project No. 22-49-02041 dated 09.03.2022)
2. Министерство образования и науки Российской Федерации - a grant of the Ministry of Science and Higher Education (project No. 075-15-2021-627 dated 08.06.2021)