Microstructure of the deposited NiCrBSiC coating after laser polishing

Получена 10 июня 2022; Принята 12 сентября 2022;
Эта работа написана на английском языке
Цитирование: L.E. Afanasieva, I.S. Pavlov. Microstructure of the deposited NiCrBSiC coating after laser polishing. Письма о материалах. 2022. Т.12. №4. С.287-291
BibTex   https://doi.org/10.22226/2410-3535-2022-4-287-291

Аннотация

HAADF image of the cross section of the NiCrBSiC coatingThe structure of the surface layers of NiCrBSiC coatings obtained by powder laser cladding and subsequent laser polishing with a multichannel CO2 laser has been studied. XRD and TEM / STEM showed that the coatings are a γ-Ni matrix with Ni3B, Cr3C2 and Ni3Si precipitates. It was shown that the matrix of the coating after laser cladding has a high density of dislocations, which form networks. XRD evidences a decrease in the number of the precipitates after laser polishing and TEM / STEM demonstrated a decrease in the density of dislocations and the appearance of nanostructured γ-Ni layers in the form of flat elongated plates. The width of nano-grains is ≈20 nm near the interface and increases with distance from it. Microhardness measurements showed an increase from 4.4 to 5 GPa after laser polishing.

Ссылки (27)

1. X. Yan, S. Gao, C. Chang, J. Huang, K. Khanlari, D. Dong, W. Ma, N. Fenineche, H. Liao, M. Liu. Journal of Materials Processing Technology. 288, 116878 (2021). Crossref
2. O. G. Devojno, E. Feldshtein, M. A. Kardapolava, N. I. Lutsko. Optics and Lasers in Engineering. 106, 32 (2018). Crossref
3. E. J. Chun, C. Park, H. Nishikawa, M. S. Kim. Applied Surface Science. 442, 726 (2018). Crossref
4. I. Hemmati, J. C. Rao, V. Ocelík, J. T. M. De Hosson. Microscopy and Microanalysis. 19 (1), 120 (2013). Crossref
5. X. Yan, C. Chang, Z. Deng, B. Lu, Q. Chu, X. Chen, W. Ma, H. Liao, M. Liu. Tribology International. 157, 106873 (2021). Crossref
6. L. E. Afanasieva, G. V. Ratkevich. Letters on Materials, 8 (3), 268 (2018). (in Russian) [Л. Е. Афанасьева, Г. В. Раткевич. Письма о материалах. 8 (3), 268 (2018).]. Crossref
7. L. E. Afanas’eva, G. V. Ratkevich, M. V. Novoselova. Metal Science and Heat Treatment. 61, 581 (2020). Crossref
8. R. Gonzalez, M. Cadenas, R. Fernandez, J. L. Cortizo, E. Rodríguez. Wear. 262 (3 - 4), 301 (2007). Crossref
9. N. N. Soboleva, A. V. Makarov, I. Yu. Malygina. Metal processing (technology, equipment, tools). 4 (61), 79 (2013). (in Russian) [Н. Н. Соболева, А. В. Макаров, И. Ю. Малыгина. Обработка металлов (технология, оборудование, инструменты). 4 (61), 79 (2013).].
10. N. Serres, F. Hlawka, S. Costil, C. Langlade, F. Machi. Journal of thermal spray technology. 20, 336 (2011). Crossref
11. V. I. Yugov, L. E. Afanasieva, M. V. Novoselova. Hardening technologies and coatings. 11 (143), 19 (2016). (in Russian) [В. И. Югов, Л. Е. Афанасьева, М. В. Новоселова Упрочняющие технологии и покрытия. 11 (143), 19 (2016).].
12. Z. Bergant, J. Grum. Journal of thermal spray technology. 18, 380 (2009). Crossref
13. A. A. Burtsev, O. Ya. Butkovskiy. Physical and chemical aspects of the study of clusters, nanostructures and nanomaterials. 11, 107 (2019). (in Russian) [А. А. Бурцев, О. Я. Бутковский. Физико-химические аспекты изучения кластеров, наноструктур и наноматериалов. 11. 107 (2019).]. Crossref
14. T. Ermergen, F. Taylan. Arabian Journal for Science and Engineering. 46, 7125 (2021). Crossref
15. A. Gisario, M. Barletta, F. Veniali. The International Journal of Advanced Manufacturing Technology. 120, 1 (2022). Crossref
16. E. V. Bordatchev, A. M. K. Hafiz, O. R. Tutunea-Fatan. The International Journal of Advanced Manufacturing Technology. 73, 35 (2014). Crossref
17. E. Ukar, A. Lamikiz, L. L. de Lacalle, D. Del Pozo, J. L. Arana. International Journal of machine tools and manufacture. 50 (1), 115 (2010). Crossref
18. L. Chen, B. Richter, X. Zhang, K. B. Bertsch, D. J. Thoma, F. E. Pfefferkorn. Materials Science and Engineering: A. 802, 140579 (2021). Crossref
19. Y. Liu, W. Ouyang, H. Wu, Z. Xu, L. Sheng, Q. Zou, J. Jiao. Journal of Materials Processing Technology. 300, 117428 (2022). Crossref
20. B. Zhang, H. Yang, H. Liu, J. Hao, X. Liu. Applied Surface Science. 573, 151557 (2022). Crossref
21. A. W. Hull. Physical Review. 10, 661 (1917). Crossref
22. G. F. Kayser, F. X. Kayser. Journal of Alloys and Compounds. 233, 74 (1996). Crossref
23. N. F. Lashko. Doklady Akademii Nauk SSSR. 81, 606 (1951). (in Russian) [Н.Ф. Лашко. Доклады Академии Наук СССР. 81, 606 (1951).].
24. E. Bouzy, E. Buer-Grosse, G. Le Caër. Philosophical Magazine Part B. 68 (5), 619 (1993). Crossref
25. I. I. Novikov. Defects in the crystal structure of metals. Moscow, Metallurgiya (1975) 208 p. (in Russian) [И. И. Новиков. Дефекты кристаллического строения металлов. Москва, Металлургия (1975) 208 с.].
26. J. Friedel. Dislocations: international series of monographs on solid state physics. V. 3. Elsevier (2013) 660 p.
27. V. L. Popov. Contact interaction mechanics and friction physics. From nanotribology to earthquake dynamics. Moscow, Fizmatlit (2013) 352 p. (in Russian) [В. Л. Попов. Механика контактного взаимодействия и физика трения. От нанотрибологии до динамики землетрясений. Москва, Физматлит (2013) 352 с.].

Другие статьи на эту тему

Финансирование на английском языке

1. Ministry of Science and Higher Education of Russian Federation - State assignment Federal Scientific Research Centre «Crystallography and Photonics»