Technological properties of sheet titanium alloys VT6

R.V. Safiullin, S.P. Malysheva, R.G. Khazhaliev, A.R. Safiullin, A.V. Berestov, E.A. Plaksina показать трудоустройства и электронную почту
Получена 27 сентября 2022; Принята 06 марта 2023;
Эта работа написана на английском языке
Цитирование: R.V. Safiullin, S.P. Malysheva, R.G. Khazhaliev, A.R. Safiullin, A.V. Berestov, E.A. Plaksina. Technological properties of sheet titanium alloys VT6. Письма о материалах. 2023. Т.13. №2. С.98-103
BibTex   https://doi.org/10.22226/2410-3535-2023-2-98-103

Аннотация

The test sample before and after SPFThis paper presents a comprehensive study of the microstructure, mechanical and technological properties (formability and weldability in solid state) of sheet blanks made of titanium alloy VT6, developed specifically for superplastic forming and diffusion bonding (SPF / DB) in PJSC VSMPO-AVISMA Corporation using various technologies. The conducted studies have made it possible to establish that sheets of titanium alloy VT6 with different microstructure in the temperature range of 850 – 920°C exhibit good superplastic properties. Studies of the technological properties of experimental sheets show their good weldability and high formability under superplasticity conditions. The relative length of the pores in the zone of the solid-phase joints is from 5.3 to 1.8 %, the equivalent deformation during SPF is from 1500 to 2700 %. The technological properties of the VT6 alloy in different states are very similar. The results obtained allow us to recommend this experimental sheet alloy for the manufacture of hollow structures by the SPF / DB process under superplasticity.

Ссылки (21)

1. R. V. Safiullin, A. R. Safiullin, S. P. Malysheva, A. N. Kozlov, A. V. Berestov, R. M. Galeev, O. R. Valiakhmetov. Letters on Materials. 6 (4), 281 (2016). (in Russian) [Р. В. Сафиуллин. Письма о материалах. 6 (4), 281 (2016).]. Crossref
2. R. V. Safiullin, M. H. Mukhametrakhimov, S. P. Malysheva, A. R. Safiullin, A. N. Kozlov, A. V. Berestov, S. A. Kharin, M. A. Morozov. Letters on Materials. 8 (3), 329 (2018). (in Russian) [Р. В. Сафиуллин. Письма о материалах. 8 (3), 329 (2018).]. Crossref
3. R. Safiullin, S. Malysheva, R. Galeyev, M. Mukhametrakhimov, A. Safiullin, R. Khazhaliev, A. Berestov. Solid State Phenomena. 306, 33 (2020). Crossref
4. R. V. Safiullin, S. P. Malysheva, A. A. Zakirova, R. G. Khazgaliev, A. F. Aletdinov. Proceedings of the 63rd International Conference “Actual problems of Strength”. Togliatti, Russia (2021) р. 281. (in Russian) [Р. В. Сафиуллин и др. Труды 63-й Международной конференции «Актуальные проблемы прочности». Тольятти, Россия (2021) с. 281.].
5. R. V. Safiullin R. M. Galeyev, M. Kh. Myhametrahimov, R. G. Hazgaliev, S. P. Malysheva, R. R. Mulykov, A. N. Kozlov, A. V. Berestov, M. O. Leder. Titanium. 3 (53), 47 (2016). (in Russian) [Р. В. Сафиуллин и др. Титан. 3 (53), 47 (2016).].
6. R. J. Lederich, S. M. L. Sastry, M. Hayse, T. L. Mackay. Journal of Metals. 34, 16 (1982). Crossref
7. A. H. Akhunova, S. V. Dmitriev. Deformation and destruction of materials. 11, 40 (2009). (in Russian) [А. Х. Ахунова. Деформация и разрушения материалов. 11, 40 (2009).].
8. W. Beck. Euro-SPF 2004 Third European Conference on Superplastic Forming. Albi, France (2004) p. 147.
9. A. K. Ghosh, C. H. Hamilton. Metal. Trans. 11, 1915 (1980). Crossref
10. B. Zhang, P. S. Bate, N. Ridley, S. Dover. 4th European Conference on Superplastic Forming Euro SPF’05. Manchester, UK (2005) p. 173.
11. D. Sorgente, L. Tricarico. Materials Science Forum. 735, 383 (2012). Crossref
12. A. J. Barnes, H. Raman, F. Lowerson, D. Edwards. Materials Science Forum. 735, 361 (2012). Crossref
13. E. P. Marinho, A. Sakata, E. F. Prados, G. F. Batalha. Materials Science Forum. 735, 224 (2012). Crossref
14. A. J. Carpenter, A. J. Barnes, E. M. Taleff. Materials Science Forum. 735, 93 (2012). Crossref
15. G. Dai, F. Jarrar, F. Ozturk, J. Sheikh-Ahmad. Defect and Diffusion Forum. 385, 379 (2018). Crossref
16. M.L. Guo, M. J. Tan, X. Song, B. W. Chua. Defect and Diffusion Forum. 385, 391 (2018). Crossref
17. G. Kumaresan, K. Kalaichelvan. Defect and Diffusion Forum. 385, 437 (2018). Crossref
18. T. G. Langdon. Solid State Phenomena. 306, 1 (2020). Crossref
19. K. A. Padmanabhan, S. Balasivanandha Prabu, R. R. Mulyukov, A. Nazarov, R. M. Imayev, S. Ghosh Chowdhury. Superplasticity. Common Basis for a Near-Ubiquitous Phenomenon. Springer-Verlag GmbH Germany (2018) 526 p. Crossref
20. R. V. Safiullin, F. U. Enikeev, R. Ya. Lutfullin. Forging and stamping production. 4, 8 (1994). (in Russian) [Р. В. Сафиуллин Кузнечно-штамповочное производство. 4, 8 (1994).].
21. R. V. Safiullin, F. U. Enikeev. IOP Conf. Ser.: TMS Annual Meeting.“Superplasticity and Superplastic Forming”. Las Vegas, USA (1995) p. 213.

Другие статьи на эту тему