Improving the accuracy of finite element modeling of superplastic forming processes

O.P. Tulupova, C. Gumerova, V.R. Ganieva ORCID logo , A.A. Kruglov, F.U. Enikeev ORCID logo показать трудоустройства и электронную почту
Получена 12 марта 2022; Принята 13 мая 2022;
Эта работа написана на английском языке
Цитирование: O.P. Tulupova, C. Gumerova, V.R. Ganieva, A.A. Kruglov, F.U. Enikeev. Improving the accuracy of finite element modeling of superplastic forming processes. Письма о материалах. 2022. Т.12. №2. С.142-147
BibTex   https://doi.org/10.22226/2410-3535-2022-2-142-147

Аннотация

Unlike of our previous report the method suggested takes into account consideration the initial stage of superplastic forming, when the pressure of the inert gas changes from the initial zero level to a pre-given constant value. It is shown that such kind refinement enables one to improve considerably the accuracy of calculating the value of the strain rate sensitivity index, m, and, as a result, to provide more accurate finite element description of the superplastic forming processes.A method of improving the accuracy of finite element modeling of superplastic forming processes is suggested. It is based on improving the accuracy of determining the values of material constants for the standard power law of superplastic flow from the results of technological experiments under constant pressure forming of hemispherical domes. Unlike other known procedures, the method suggested takes into consideration the initial stage of superplastic forming, when the pressure of the inert gas changes from the initial zero level to a pre-given constant value. Since this part of loading is usually neglected in reports known in the literature the main attention in the present study is paid to the analysis of its importance as far as the accuracy of finite element modeling is concerned. Besides, the entry radius in the die used is also a variable in the analysis. The calculations are performed for alloys Ti-6Al-4V, AZ31, AA5083 using the experimental data known in the literature. Finite element modeling is carried out using the ANSYS code. It is concluded that the influence of the initial part of loading should be considered in finite element modeling of the superplastic forming processes since this factor can affect the accuracy of predictions.

Ссылки (21)

1. A. J. Barnes. J. Mater. Eng. Perform. 16 (4), 440 (2007). Crossref
2. J. Hedworth, M. J. Stowell. J. Mater. Sci. 6, 1061 (1971). Crossref
3. F. Jovane. Int. J. Mech. Sci. 10 (5), 403 (1968). Crossref
4. G. G. Cornfield, R. H. Johnson. Int. J. Mech. Sci. 12 (6), 479 (1970). Crossref
5. D. L. Holt. Int. J. Mech. Sci. 12, 491 (1970). Crossref
6. F. U. Enikeev, A. A. Kruglov. Int. J. Mech. Sci. 37 (5), 473 (1995). Crossref
7. G. Giuliano, S. Franchitti. Int. J. Mach. Tools Manuf. 48 (12-13), 1519 (2008). Crossref
8. F. Jarrar, R. Jafar, O. Tulupova, F. Enikeev, N. Al-Huniti. Mater. Sci. Forum, 838 - 839, 512 (2016). Crossref
9. S. A. Aksenov, I. Y. Zakhariev, I. V. Logashina. Letters on materials. 7 (1), 49 (2017). (in Russian) [И. Ю. Захарьев, С. А. Аксенов, И. В. Логашина. Письма о материалах. 7 (1), 49 (2017).]. Crossref
10. S. A. Aksenov, V. Mikolaenko. Metals. 10 (10), 1353 (2020). Crossref
11. K. A. Padmanabhan, R. A. Vasin, F. U. Enikeev. Superplastic Flow. Springer-Verlag (2001) 363 p. Crossref
12. V. R. Ganieva, F. U. Enikeev, A. A. Kruglov. Mech. of Solids. 53 (2), 138 (2018). Crossref
13. O. Tulupova, V. Ganieva, A. Kruglov, F. Enikeev. Letters on materials. 7 (1), 68 (2017). (in Russian) [О. П. Тулупова, В. Р. Ганиева, А. А. Круглов, Ф. У. Еникеев. Письма о материалах. 7 (1), 68 (2017).]. Crossref
14. V. Ganieva, A. Kruglov, R. Lutfullin, O. Rudenko, F. Enikeev. IOP Conf. Ser.: Mater. Sci. and Eng. 447, 012050 (2018). Crossref
15. R. A. Vasin, F. U. Enikeev, M. Tokuda, R. V. Safiullin. Int. J. of Non-linear Mech. 35, 799 (2003). Crossref
16. V. R. Ganieva, O. P. Tulupova, F. U. Enikeev, A. A. Kruglov. Russian Eng. Res. 37 (5), 401 (2017). Crossref
17. A. A. Kruglov, O. P. Tulupova, N. V. Olimpieva, V. R. Ganieva, F. U. Enikeev. IOP Conf. Ser.: Mater. Sci. and Eng. 1008, 012050 (2020). Crossref
18. G. R. Murzina, V. R. Ganieva, A. A. Kruglov, F. U. Enikeev. Letters on materials. 11 (4s), 548 (2021). Crossref
19. O. P. Tulupova, V. R. Ganieva, A. A. Kruglov, F. U. Enikeev. IOP Conf. Ser.: Mater. Sci. and Eng. 447, 012039 (2018). Crossref
20. G. Dai, F. Jarrar, F. Ozturk, J. Sheikh-Ahmad, Z. Li. Open Access Metallurgy J. 9 (12), 1273 (2019). Crossref
21. G. Dai, F. Jarrar, F. Ozturk, J. Sheikh-Ahmad. Defect and Diffusion Forum. 385, 379 (2018). Crossref

Другие статьи на эту тему