Volume 4, Issue 1, April 2014

Features of structural phase transformations in zirconium Cu-0.18%Zr alloy after high-pressure torsion and heating

On the specifics of growth nanostructured anodic oxides during their formation in the sulfuric acid solution

Effect of deformation nanostructuring and following annealing on phase composition evolution of invar alloy Fe-36%Ni

The rules for selection of dislocation nucleation centers of martensite in the dynamic theory of reconstructive martensitic transformations

Influence of the Method of Sheet Aluminum Alloys Deformation on the Increase of Plastic Deformations

On the possibility of creation of the new state of fullerene's structures by the variation of the isotopic composition of carbon

Opportunities of application the screw passing in the production the high-carbon wire with the fine-grained structure

Research of energy dissipaton ability of solid heat-resistant cellular materials (solid foams)

Impact of hard element on the free surface of an elastic material

Forming structure wire in the process of radial displacement broach

The morphology change in the copper microcrystals by electrolytic origin during inhibition of the evolution of low-energy facets {111}

Titanium surface processing by nanosecond laser radiation

Investigation of the microstructure and mechanical properties of the aircraft engine compressor blades made from the titanium alloy with submicrocrystalline structure

The increase of impact strength of ultrafine grained nickel after ultrasonic treatment

The effect of complex deformation processing on structure and mechanical properties of steel 05G2MFB

Magnetic hysteresis properties of Fe-26Cr-16Co hard magnetic alloys

Asymmetric deformation of linear elastic cylindrical shape material

Heat conductivity reduction in case of the non-uniform extension of the lattice

Analysis of the superplastic forming of 3-sheet structure using Perzyna’s model